product10-manufacture,factory,supplier from China

Features of MDF1. The material is uniform, the layer structure is dense, the surface is smooth and clean, not easy to deform, stable performance, smooth and delicate edges, not easy to collapse and layer; non-toxic, tasteless, non-radiation, good air permeability;2. Good heat insulation performance, no aging, strong adhesion;3.

How to choose particle board1. Check the particleboard test report. Generally, products sold by regular manufacturers have test reports from relevant departments. The test report includes some important physical and mechanical performance indicators. Among them, the detection value of free formaldehyde, which is a mandatory indicator, should be as low as possible.2. Smell the smell of particleboard. Particleboard is processed from wood chips and will emit a delicate wood smell, indicating that the release of formaldehyde is less.

Features of MDF:1. The internal structure is uniform, the density is moderate, the dimensional stability is good, the deformation is small, and the physical and mechanical properties are moderate.2. The surface is smooth and smooth, with good machinability. It can be pasted with sliced veneer or with novel and beautiful patterns.

1. Physical and mechanical propertiesBecause the fiber structure of the board is uniform and the bonding strength between fibers is high, its static bending strength, plane tensile strength and elastic modulus are good. However, because MDF is made of logs that are ground into fibers, which completely changes the structure of the wood, it has higher moisture absorption, water absorption performance, and higher thickness expansion rate, and its nail holding power is worse than that of particleboard.2.

    Fiberboard, also referred to as density board, is a timber-primarily based panel made of wood fiber or exceptional vegetable fibers with urea formaldehyde resin or other relevant adhesives. adhesives and/or additives can be carried out sooner or later of manufacturing. fiberboard has the benefits of uniform , small vertical and horizontal power distinction, and isn't easy to crack. it's miles considerably used.

  Density board is made of wood fiber or other plant fiber, prepared by fiber, applied with synthetic resin, and pressed under heat and pressure.Certificates ISO FSC SGS  

 Advantages of FR MDF/Fire Resistant MDF 1.Excellent flame retardant performance: Comply with the B1 regulations of GB8624-2012 "Classification of Combustion behavior of Building Materials and Products".2.Excellent environmental protection performance: the amount of formaldehyde released reaches the level of E0 and E1 in GB18580-2017 "Limits of formaldehyde release in wood-based panels and their products for interior decoration materials"3.

Fiberboard is a kind of man-made board made of wood fiber or other plant fibers with urea formaldehyde resin or other applicable adhesives. As it is soft and impact resistant, it has high strength, uniform density after pressing, and is easy to reprocess, but its disadvantage is poor water resistance.Advantages1.Fiberboard is easy to be coated.

According to density, it can be divided into: high-density fiberboard, medium-density fiberboard, and low-density fiberboard (the density of medium-density fiberboard is 500 kg/m3-880 kg/m3, and the density of high-density fiberboard is ≥800 kg/m3).According to the national standard (GB/T 11718-2021), it is divided into: ordinary MDF, furniture MDF and load-bearing MDF.According to the use, it can be divided into: furniture board, floor base material, door panel base material, electronic circuit board, engraving and milling board, moisture-proof board, fire-proof board and line board

Medium Density Fiberboard Introduction:Density board, also known as fiberboard (full name: MDF fiberboard), is a man-made board made of wood fiber or other plant fiber, applied with urea-formaldehyde resin or other suitable adhesives. According to its density, it can be divided into high density board, medium density board and low density board. Mainly used for laminate flooring, door panels, partition walls, furniture, etc.

FR MDF Advantages:1.The fireproof board has low hygroscopicity, stable water-absorbing thickness expansion rate, and excellent moisture-proof performance. It is especially suitable for secondary processing such as finishes, adhesives, and paints.

What are the common wood products in life that are MDF?    The common one may be the table. Some people think that the table should be made of solid wood, but in fact, many tables are made of density board, and then the surface is veneered to make the surface resistant to dirt and wear, and not easy to change color.

Advantages of MDF1. The internal structure is uniform, the density is moderate, the dimensional stability is good, the deformation is small, and the physical and mechanical properties are moderate.2. The surface is smooth and smooth, with good machining performance. It can be pasted with sliced veneer, patterns and novel and beautiful decorative papers. Therefore, it is very popular in home decoration and is often used to make furniture and partitions.3. It can be used as the middle frame and middle clip strip in the modern decorative frameless painting.

FeaturesThe density board surface is smooth and flat, the material is fine and dense, the performance is stable, the edge is firm, and the surface of the board is very decorative. But the density board has poor moisture resistance. In contrast, the nail-holding force of MDF is worse than that of particleboard. If the screws loosen after tightening, it is difficult to fix them at the same position.The main advantage1. Density board is easy to be painted. All kinds of paints and paints can be evenly coated on the density board, which is the first choice for paint effect.2.

     Particleboard is a wood-based panel made of wood or other lignocellulosic materials, which is glued under heat and pressure after applying an adhesive, also known as particle board and particle board.

1.

MDF Mechanical propertiesBecause the fiber structure of the board is uniform and the bonding strength between fibers is high, its static bending strength, plane tensile strength, and elastic modulus are better than particleboard.

Moistureproof board is to add a certain proportion of moistureproof particles in the production process of the base material, also known as melamine board (base material), which can greatly reduce the degree of expansion of the board when encountering water.  Gaotang County Xinhua Wood Industry Co., Ltd. was established in April 2010 with a registered capital of 11 million yuan. It covers an area of about 76,600 square meters, including a construction area of about 22,000 square meters.

The wood-based panel is formed by interweaving lignocellulose fibers and is made of its inherent adhesive properties. Adhesives and/or additives may be applied during manufacturing.Fiberboard, also known as density board, is a wood-based panel made of wood fiber or other vegetable fibers with urea formaldehyde resin or other applicable adhesives. Adhesives and/or additives may be applied during manufacturing. Fiberboard has the advantages of uniform material, small vertical and horizontal strength difference, and is not easy to crack. It is widely used.

The wood-primarily based panel is fashioned by interweaving lignocellulose fibers and is made of its inherent adhesive properties. adhesives and/or components can be applied for the duration of production.Fiberboard, also called density board, is a wood-primarily based panel made from wood fiber or unique vegetable fibers with urea formaldehyde resin or different relevant adhesives. adhesives and/or components can be applied at some point of manufacturing. fiberboard has the blessings of uniform cloth, small vertical and horizontal power difference, and isn't easy to crack.

    Medium density fiberboard is a kind of artificial board made from the thinned wood of branches, small diameter wood, fast-growing wood, bamboo and other plant materials with limited wood resources. The comprehensive utilization rate of wood is high, which conforms to China's forestry development policy and is conducive to the implementation of China's forestry sustainable development strategy.Medium density fiberboard DisplayProduct Certificates-SGS,ISO9001,FSC  

Particle Board Advantages1) tight creation and high strength2) minimum twisting, delamination or warping3) no rotten or decay, sturdy in opposition to corrosion and fireplace4) water evidence, steady while exposed within the herbal or moist surroundings5) low formaldehyde emission6) ideal nailing strength, clean to be sawn, nailed, drilled, grooved, planed, filed or polished7) precise warm temperature and sound resistant, clean to be covered8) presenting manufacturing record9) supplying check record10) competitive cargo11) aggressive after-sales serviceParticle board detailsSize1220*2440mmThic

Raw material of Particle board.1.Particleboard is made on the basis of scrap materials, but the range of scrap materials is relatively wide. According to different types of scrap materials, particleboard can be divided into wood particleboard, bagasse particleboard, flax chipboard, cotton stalk particleboard, Bamboo particle board, etc., cement particle board, gypsum particle board. It can be seen that most of the scraps contain wood cellulose.

FeaturesThe density board surface is smooth and flat, the material is fine and dense, the performance is stable, the edge is firm, and the surface of the board is very decorative. But the density board has poor moisture resistance. In contrast, the nail-holding force of MDF is worse than that of particleboard. If the screws loosen after tightening, it is difficult to fix them at the same position.The main advantage1. Density board is easy to be painted. All kinds of paints and paints can be evenly coated on the density board, which is the first choice for paint effect.2.