Flakeboard-manufacture,factory,supplier from China

   Particle board is also referred to as chipboard or flakeboard, it's a form of wood-primarily based panel made of timber or different lignocellulosic materials and stuck under warmth and strain after applying adhesive.

What is particle board?  Particle board is also called chipboard or flakeboard. It is made of wood or other nitrocellulose materials. It is a wood-based board glued under the action of heat and pressure after applying an adhesive.

    Particleboard, also known as chipboard, flakeboard, is a wood-based panel that is made of wood or other lignocellulosic materials and glued under heat and pressure after applying an adhesive. It is mainly used in furniture manufacturing and construction industry as well as train and car carriage manufacturing.Method for judging the quality of particleboard wardrobes1. From the appearance point of view, look at the size and shape of the sawdust particles in the center of the cross section. The length is generally 5-10MM.

What are the common wood products in life that are MDF?    The common one may be the table. Some people think that the table should be made of solid wood, but in fact, many tables are made of density board, and then the surface is veneered to make the surface resistant to dirt and wear, and not easy to change color.

1. Introduction of MDFMDF is actually a kind of density board, which also includes short fiberboard and long fiberboard. MDF is mainly made of plant fibers or wood fibers. After the fibers are crushed, separated, and dried, a urea-formaldehyde resin or other suitable adhesive is added and pressed at high temperature. A kind of man-made board.2. MDF sizeThe thickness of MDF is generally between 3mm-30mm, and the density of MDF is very high. Generally, the choice of MDF depends on the density of MDF to determine the quality of MDF.

National Standard for Medium Density FiberboardMedium density fiberboard is a kind of man-made board with a density of about 0.5-0.88gcm3 after processing selected wood raw materials into fibers, adding urea-formaldehyde resin and other additives, and making it through a special process.

The following aspects should be paid attention to when choosing medium density fiberboard;1. From the appearance, check whether the thickness and density are uniform, whether the corners are damaged, whether there are delamination, blister, charcolization, etc., and whether there are soft parts.2. When conditions permit, you can saw a small piece of medium density fiberboard and soak it in water with a water temperature of 20°C for 24 hours to observe its thickness change, and at the same time observe whether there are small bulges on the surface of the board.

      Density board is called density fiberboard. It is made of wood fiber or other plant fiber, prepared by fiber, applied with synthetic resin, and pressed under heat and pressure.     According to its density, it can be divided into high-density fiberboard, medium-density fiberboard and low-density fiberboard.

    Medium density fiberboard is a kind of artificial board made from the thinned wood of branches, small diameter wood, fast-growing wood, bamboo and other plant materials with limited wood resources. The comprehensive utilization rate of wood is high, which conforms to China's forestry development policy and is conducive to the implementation of China's forestry sustainable development strategy.Medium density fiberboard DisplayProduct Certificates-SGS,ISO9001,FSC  

MDF Products Display     MDF (Medium Density Fibreboard) is by far the most commonly used carpentry material and it is compatible with many different finishes – including simple and lacquered finishes, glued to natural boards, melamine boards and even graphic prints. They can also be used in other places, such as cladding of walls and doors.

Fiberboard is a kind of man-made board made of wood fiber or other plant fibers with urea formaldehyde resin or other applicable adhesives. As it is soft and impact resistant, it has high strength, uniform density after pressing, and is easy to reprocess, but its disadvantage is poor water resistance.Advantages1.Fiberboard is easy to be coated.

    Medium density fiberboard is made of wood fiber and other fibers as raw materials, prepared by fiber, then applied with synthetic glue and other functional materials, and pressed into boards with different thicknesses and densities under heat and pressure. Among them, the moisture-proof MDF is made of modified melamine cyanamide adhesive or MDI type adhesive, and the use of waterproofing agent is improved at the same time.

Advantages of MDF1. The density of medium density fiberboard is very high, so it is called MDF. Its surface can be pasted with melamine or wood veneer. Its physical properties are very good, the material is uniform, and there is no dehydration problem, so it will not be deformed by moisture.2. Medium density fiberboard is made of crushed plant fibers and pressed at high temperature, so the surface of this board is very smooth and square. It can be used not only as furniture materials, but also as decorative panels, light metal sheets, veneer, etc.3. Is MDF high in formaldehyde?1.

An Introduction to OSB Board      OSB is Oriented Strand Board ,the upgrading of traditional particle board.

What is OSB ?Oriented Strand Board (OSB) is a kind of fresh wood with large diameter and straight trunk as raw material. It is processed along the direction of wood grain by special slicing processing equipment.

Oriented Strand Board Introduction:Oriented strand board (OSB), also called European pine board, is made of small diameter wood, interfelled wood, wood core, board veneer, branch Y wood, etc., and processed into 90-130mm long, 5-30mm wide and 0.5mm thick strands in the direction of wood grain by special planing equipment (long wood planer or two-stage chipping planing equipment), then dried, glued, and formed in the prescribed direction by hot pressing.

    OSB board is the upgrading of traditional particle board.

What is OSB Board?       Oriented strand board (OSB) is a type of engineered wood similar to particle board, formed by adding adhesives and then compressing layers of real wood strands (flakes) in specific orientations.

    Oriented strand board (OSB), also known as Ozon board, originated in the 1970s and developed from structural particle board-waffle board. Since the mid-1980s, it has developed rapidly in North America and Europe, and has begun to replace plywood in large quantities. For use with fiberboard.    Oriented strand board is a new type of high-strength environmental protection board.

   The production of chipboard in China has gone through a repeated process from the rise in the 1980s to the decline in the 1990s and then to the rise again in 2000. After the particle board was abandoned by the market due to poor quality and other reasons, many particle board enterprises learned a lesson, introduced advanced production lines from abroad and improved the technology level.    After that, the quality of particle board in China has improved significantly, and it has been accepted by the market again.

Characteristics of OSB1. Wide sources of raw materials and low prices.The raw materials of directional particle board are mainly small diameter wood of soft coniferous wood and broad-leaf wood, fast-growing thinning forest, such as eucalyptus, Chinese fir, poplar thinning wood, etc., with a wide range of sources.2. High output rateCompared with other types of wood-based boards, oriented particle board has a higher output rate.

  Density board is made of wood fiber or other plant fiber, prepared by fiber, applied with synthetic resin, and pressed under heat and pressure.Certificates ISO FSC SGS  

Particle Board Quality Particle board is also called particle board or particle board. it's miles a form of timber-based panel product of timber or different lignocellulosic substances and stuck under warmness and stress after making use of adhesive. it's also known as chipboard.

Oriented strand board is a new type of high-strength environmental protection board. Under the background of the prominent structural contradiction between the supply and demand of wood in my country and the prevalence of green environmental protection concepts, oriented strand board relies on a wide range of material sources, advanced production technology, and excellent mechanical properties.